How To Replace Ray Ban Lenses

How To Remove Lens

1. Order Your Ray Ban Replacement Lens

   Order your Ray Ban replacement lenses to fit the style & size of the frames you’re working with.
   

2. Hold The Ray Ban Sunglasses Firmly

   Hold your Ray Ban sunglasses firmly by the nosepiece. Grasp them with the outside lenses facing you and the earpieces pointing away.

3. Gently Remove Old Lens

   Press the frames outward gently with your thumbs–keeping a light tension with your fingers–until the lens pops backwards out of the frame. It might take some steady pressure to get the lens out, but hold onto to nosepiece and corner of lens frame supporting the frame so it doesn’t snap, then bend out a little and push the lens away from you.

4. **TIP

   Apply heat to the frames helps loosen it up. Fill a sink with hot tap water, and hold lens area of the sunglasses frames under water (fill with hot running water from the sink faucet; NOT boiling water). Keep under water for 30 seconds. Repeat process above.

5.  Replace The Lens 

   Turn the glasses around so that the earpieces point toward you.
   Place the new lens on the inside of the frame, against the opening where it should be installed. Wrap your fingers around the frame. Place both thumbs against either side of the lens, and press gently and evenly until it pops into place. Apply pressure around the edges of the new lens–still working from inside the glasses–to make sure it’s firmly seated all the way around.